Постинг
11.01.2018 10:40 -
ultrafine mill installation and maintenance
ultrafine mill wide range of applications, can be used for a variety of materials grinding operations, such as quartz, feldspar, clay, clay, bentonite, calcite, talc, barite, fluorite, clay, lime, Mohs below seven humidity below 6% of various non-flammable and explosive mineral materials.
In all walks of life, can be applied to the mill, than not ultrafine mill, it can be widely used in metallurgy, building materials, chemicals, mining and other fields of mineral materials grinding process. In these industries, the milling equipment is reused, the material is ground to the desired particle size, and further applications are made.
However, it is a very particular job about its installation. Maintenance of the machine is a recurrent work that should be closely coordinated with its operation and overhaul, etc., and should be staffed in full order for better performance.
In the milling equipment installation test, should be installed on the level of concrete foundation, with anchor bolts; in the installation, should pay attention to the main body and the horizontal vertical; after installation, to check the various parts of the bolt loose, the host Of the warehouse door is fastened, once found, to immediately tighten; but also according to the power of the device configuration power cord and control switch; after the inspection is completed, empty load test, the test is normal, you can produce.
Следващ постинг
Предишен постинг
Няма коментари
Търсене
За този блог
Гласове: 0
Архив